Subsea block

Subsea block  - 6_1.jpg
Subsea block  - 6_1.jpg
Subsea block  - 6_2.jpg
Subsea block  - 6_3.jpg
Our products are in accordance with the Machinery Directive 2006/42/EC and are standard delivered with 100% material traceability.  Our standard products meet with the requirements according to Norwegian Maritime Directorate, Det Norske Veritas, Bureau Veritas, Lloyds Register of Shipping, Germanischer LLoyds, American Bureau of Shipping, NORSOK and/or other class society requirements upon request. Before products are shipped they are subject to a load test, inspection and/or performance check.

ask for product

"Gleipnir Subsea blocks are equipped with pressure sealed axial bearings and a sheave with self lubricating bushings which turns on a stainless steel bearing pin. The easy reeve function allows a quick change from whip to main. Implementing this as a key design factor, resulted in flawless subsea operations."

Design Loads 25 - 400 T
  • In accordance with DNV rules for subsea operations and lifting appliances
  • Safety latch
  • 100% material traceability
  • Subsea surface conservation
  • Pressure sealed axial bearing
  • Sheave equipped with self lubricating bushings
Easy rigging, enough clearance for passing of:  
  • Open spelter sockets
  • Closed spelter sockets